Default Snmp Mapping; Configuring Snmp Mib Files - Siemens 9810 Series User Manual

9410 series - User manual
NOTE: The number of events or maximum time delay settings only apply to enterprise SNMP
traps.
See ION Reference, available from www.usa.siemens.com/pds, for detailed information on the
SNMP Mapping, SNMP Options and Alarm Options modules.

Default SNMP mapping

Enabling SNMP provides SNMP access to the meter values linked to the SNMP Mapping module.
You can configure the SNMP Mapping module to link to different meter values. By default, the
following meter values are linked to the SNMP Mapping module:
I a
I b
I c
I avg
kW tot
kVAR sd mx
rec
kVA sd mx rec kVA sd mx del-rec kVA sd del kVA sd rec kVA sd del-rec kWh del
kWh rec
kVAh rec
The following meter information is always provided by default and cannot be configured:
Volts mode
Serial number
Firmware version MIB version
If you change your meter's default values, you must modify the custom MIB file to reflect the new
values.
Changing your meter's default SNMP configuration assumes that you have an advanced
understanding of ION architecture, SNMP, and the communications network and power system
that your meter is connected to.
See ION Reference, available from www.usa.siemens.com/pds, for detailed information on the
SNMP Mapping module.

Configuring SNMP MIB files

You must configure your MIB file if you modify the default SNMP information provided by the
meter for the MIB file labels to reflect the modified values.
Download the ION MIB file from www.usa.siemens.com/pds.
7EN05-0336-09
kVAR tot Vll ca
kVA tot Vll avg
PF sign tot Vln a
Vll ab Vln b
Vll bc Vln c
kVAR sd mx del- kVAR sd
rec del
kWh del-rec kVARh del kVARh rec kVARh del-rec kVAh del
kVAh del-rec
Model number
Device name
Vln avg Ib mean
Freq Ic mx
Ia mx Ic mean
Ia mean kW sd mx del
Ib mx kW sd mx rec
kVAR sd kVAR sd del-
rec rec
Communications
kW sd mx del-
rec
kW sd del
kW sd rec
kW sd del-rec
kVAR sd mx del
kVA sd mx del
115