Device-Specific Information - Siemens 9810 Series User Manual

Maintenance 9410 series - User manual
* You can use 70% isopropyl alcohol instead of water if absolutely necessary. Cleaning the device
too frequently with isopropyl alcohol could damage the printing on labels and buttons. If you are
concerned about the risk of infection from touching surfaces, wear gloves or use hand sanitizer
afterward.

Device-specific information

Manufacturing-related information about the meter is available from the Factory module or
through Modbus commands.
The meter's Factory module stores meter details such as device type, serial number, and vendor
name. You can use ION Setup in advanced mode to view the contents of the Factory module's
setup registers. Similarly, you can use Modbus commands to read the Modbus registers mapped
to the corresponding Factory module's registers.
NOTE: Not all ION device setup registers are mapped to Modbus registers by default.
Other device-specific details, such as Product Code, are not stored in the Factory module.
Product Code (also known as Modbus Product ID) is a number that the manufacturer assigned to
a product to uniquely identify it, for use by systems that specifically require this information. You
can use the device's Modbus map and Modbus commands to read the Modbus Product ID.
See ION Reference, available from www.usa.siemens.com/pds, for more information on the
Factory module.
258 7EN05-0336-09