Introduction; Intended Audience; Associated Documents; Explanation Of Symbols - Quantum SNC 4500 User Manual

This manual provides information and instructions that support the installation and operation of two ADIC
Storage Networking Controllers, the SNC
mounted SCSI over IP (iSCSI) connectivity unit used with the Scalar 100. The SNC 4501 is an iSCSI unit
mounted internally in the Scalar 24. Both units support Gigabyte Ethernet speeds. This document uses
SNC 450x to refer collectively to the SNC 4500 and the SNC 4501.

Intended Audience

This guide is intended for operators, administrators, and maintenance personnel who interact with the
SNC 4500 and SNC 4501 hardware.

Associated Documents

The following documents are associated with this guide:
• Scalar 24 Installation and Operation Guide (62-2301-xx)
• Scalar 100 User's Guide (6-00667-xx)

Explanation of Symbols

These symbols appear throughout this document to highlight important information:
Indicates important information that helps you make better use of your system.
Note
Indicates a situation that may cause possible damage to equipment, loss of
CAUTION
data, or interference with other equipment.
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT
WARNING
AVOIDED, COULD RESULT IN DEATH OR BODILY INJURY.
SNC 450x User's Guide
® ®
4500 and the SNC 4501. The SNC 4500 is an external, rack-

Introduction

1