Table of Contents
Advertisement
The clearEventLog command clears the contents of the event log. No events are recorded until the
command has been completed. This command takes effect immediately.
Ready.
cleareventlog
Ready.
clearTraceLog
Contact ATAC before using this command.
CAUTION
The clearTraceLog command clears the contents of the trace log. No events are recorded until the
command has been completed.This command takes effect immediately.
Ready.
cleartracelog
Ready.
displayEventLog <scroll>
Contact ATAC before using this command.
CAUTION
The displayEventLog <+|-|=|<esc>> command displays the most recent page of event log entries. Typing
a "+", "-" or "=" (no quotation marks) causes the next, previous or same page of event log entries to be
displayed. No events are recorded until the command has been completed. Press ESC, then Return to exit
the command and return to CLI. New log entries begin.
The following is an example of a page of the displayeventlog command output, followed by a request for
the next page (+), followed by ESC and Return.
Scroll
Meaning
+
Display the next page of trace log entries
-
Display the previous page of trace log entries
=
Display the same page of trace log entries
Ready.
displayeventlog
Bridge Event Log
0137 10/08/2003 10:17:19 Bridge was booted/reset.
0138 10/08/2003 10:21:34 Bridge was booted/reset.
0139 10/08/2003 10:21:43 Unable to connect to an SNTP server
0140 10/16/2003 14:21:03 Bridge was booted/reset.
0141 10/16/2003 14:22:19 Bridge was booted/reset.
0142 10/16/2003 14:24:35 Bridge was booted/reset.
0143 10/17/2003 02:25:08 Unable to connect to an SNTP server
0144 10/17/2003 08:20:07 Bridge was booted/reset.
0145 10/17/2003 08:21:45 Bridge password was modified.
0146 10/17/2003 08:21:57 Bridge password was modified.
58
Management Port Command Reference
Advertisement
Table of Contents
