Naming the SNC
1
If you have not already, open an SNC Manager session.
For instructions, refer to
2
Choose a name for the SNC. Go to the Bridge Configuration page and type in a name in the text box
provided to identify your SNC.
The name can have no more than eight characters.
This name is an internal name only, not a network name. To set a network
Note
name, ask your system administrator to assign one through DNS.
3
Click Submit.
Connecting to the Ethernet Data Ports
After you have used the serial port to set an IP address for Ethernet port 2 (the management port), you can
use SNC Manager to configure the Ethernet data ports 0 and 1.
Obtain appropriate IP addresses, gateways and subnet masks from your
CAUTION
network administrator.
1
If you have not already, open an SNC Manager session.
For instructions, refer to
2
Click Ethernet.
The Ethernet Port Configuration page appears.
Management port data will already be filled in when you bring up this screen.
Note
SNC 450x User's Guide
Opening an SNC Manager Session
Opening an SNC Manager Session
on page 25.
on page 25.
27