Table of Contents
Advertisement
Restart is necessary...
Do you wish to restart (y/n)? y
Restarting...]
Ready.
SCSIPortList
The SCSIPortList command outputs available SCSI ports and their current status. Valid status values are
"O.K." and "failed." This command takes effect immediately.
Ready.
scsiportlist
4
;SCSI Port
;========================
0
1
Ready.
SCSIPortReset [port number]
The SCSIPortReset command resets the specified SCSI bus. This command takes effect immediately.
Port Number
Meaning
0 or 1
SCSI connection labeled SCSI port 0 or SCSI port 1
Ready.
scsiportreset 0
Resetting Port Number 0
Ready.
SCSITargets [port number]
The SCSITargets command displays a list of SCSI devices operational on the referenced SCSI port. This
command takes effect immediately.
Port Number
Meaning
0 or 1
SCSI connection labeled SCSI port 0 or SCSI port 1
The following shows the information which is presented after a SsciTargets 0 command:
Ready.
scsitargets 0
1
;
sb
st
sl
Ready.
set BridgeName
The set BridgeName command assigns a name to the SNC to identify a particular SNC. A
saveConfiguration restart command must be used to permanently save this configuration.
The set BridgeName command does not set the network name. It sets an
Note
internal name for your SNC 450x.
SNC 450x User's Guide
Port Status
O.K.
O.K.
Device Type
Vendor ID
Product ID Rev. Serial Number
83
Advertisement
Table of Contents
