Table of Contents
Advertisement
Ethernet Speed Choices
10
100
1000
auto
Ready.
set ethernetspeed dp0 auto
Ready. *
set EventLog [status]
Contact ATAC before using this command.
CAUTION
The set EventLog command, when enabled, records various system events to the event log. The default
setting is "enabled." Refer to
saveConfiguration norestart.
Status
Meaning
enabled
The Event Log records events
disabled
The Event Log is not created
Ready.
set eventlog disabled
Ready.*
set EventLogFilter [subsystem] [event level] [status]
Contact ATAC before using this command.
CAUTION
The set EventLogFilter command filters the data for specific SNC subsystems. If enabled for a particular
subsystem and level, that subsystem and level is masked while events are being logged. The default setting
is "disabled" for all subsystems and levels. Refer to
command must be followed by saveConfiguration restart.
Subsystem Choices
GEN
ENET
Where:
GEN =
ENET =
ISCSI =
NVRAM =
PERF =
SNC 450x User's Guide
get EventLog
on page 66. This command must be followed by
ISCSI
NVRAM
PERF
General
Ethernet
SCSI protocol of TCP/IP
Non-Volatile Random Access Memory
Performance
get EventLog Filter [subsystem]
ECC
ALL
on page 67. This
87
Advertisement
Table of Contents
