Quantum SNC 4500 User Manual page 83

Output Meaning
disabled No SCSI traffic is recorded to the Trace Log
Ready.
get tracelog
TraceLog = disabled
Ready.
get TraceLogFilter [SCSI | all] [port number]
Contact ATAC before using this command.
CAUTION
The get TraceLogFilter command displays the information in the trace log for specific SNC ports if the set
TraceLog command has been enabled. Refer to
page 100.
Port Number Meaning
0 or 1 SCSI connection labeled SCSI port 0 or SCSI port 1
all All SCSI port connections
The following is an example:
Ready.
get tracelogfilter scsi all
3
;Port Type
SCSI
SCSI
Ready.
get Username [username]
The get Username command displays the username for all Telnet, FTP, and SNC Manager web server
sessions. Refer to
set Username [username] on page
Ready.
get username
UserName = "admin"
Ready.
get VerboseMode
The get VerboseMode command displays whether or not verbose mode has been enabled. Refer to the
set VerboseMode [status]
Ready.
get verbosemode
VerboseMode = enabled
Ready.
SNC 450x User's Guide
Port Number
0
1
command.
set TraceLogFilter [SCSI | all] [port number] [status]
Filter Status
disabled
disabled
101.
on
77