Quantum SNC 4500 User Manual page 85

info
The info command displays version numbers and other product information for key components within the
SNC.
Ready.
info
Device
Serial Number
Device Version
Device Build
Build Date
Flash Revision
CLI Revision
Bridge Name
World Wide Name
Ready.
isReserved
The isReserved command displays the reservation status of the current SNC session. If the response is
Reserve Flag set, the configuration image is being modified by another CLI session. The set
commands are temporarily unavailable but get commands are available. Executing a saveConfiguration,
restoreConfiguration or firmwareRestart releases the SNC so that other users can access it. At least one
interface must always have access to the SNC. This command takes effect immediately.
Output
Reserve Flag NOT set
Reserve Flag set
Ready.
isreserved
Reserve Flag "NOT set"
Ready.
ping [port number] [IP address] <count> <size>
If the host and SNC are on different subnets, ping may return
CAUTION
"Destination Net Unreachable." Check with your network
administrator to determine if pings across subnets have been
disabled for security reasons. If so, you will need to perform the ping
from a host on the same subnet as the SNC or rely on the host's iSCSI
initiator to enumerate the SNC data ports.
The ping [mp0|dp] [xxx.xxx.xxx.xxx]<count> <size> command sends an ICMP echo request from the
specified SNC management or data ports to the specified IP address. This command takes effect
immediately.
Port Number Meaning
mp0 Ethernet management port labeled Ethernet port 2
dp0 or dp1 Ethernet data port labeled Ethernet port 0 or Ethernet port 1
SNC 450x User's Guide
= "SNC 4500"
= IPB2500100000
= 055E
= 055E
= "Oct 3 2003" 11:30:32
= 11
= 1.10
="Alpha"
= 20 00 00 10 86 10 48 68
Meaning
The configuration image is not being modified by another CLI session
The configuration image is being modified by another CLI session. The set
commands can not be issued to the SNC
79