PX720 DLTSage™ Tape Security
Quick Start Guide
TABLE OF CONTENTS
Drives ...............................................4
Pair ...................................................5
Introduction
The PX720 tape library with DLT-S4 tape drives is capable of utilizing DLTSage Tape
security. DLTSage Tape Security is a unique solution designed to prevent
unauthorized access to tape cartridges which is particularly valuable when
protecting tapes that are transported offsite. DLTSage Tape Security is a firmware
feature designed into the DLT-S4 tape drive which uses an electronic key to prevent
or allow reading and writing of data on to a tape cartridge. This key is managed
through the remote management pages of the PX720 tape library (refer to the
Quantum PX720 User's Guide
CD
for more information on the remote management pages). DLTSage Tape
Security is available at no additional cost as an integrated feature of the DLT-S4
tape drive and PX720 tape library (firmware revision 4.5 or later).
Notational Conventions
This instruction uses the following conventions:
N
: Notes emphasize important information related to the main topic.
OTE
C
:
Cautions indicate potential hazards to equipment and are included
AUTION
to prevent damage to equipment.
W
: Warnings indicate potential hazards to personal safety and are
ARNING
included to prevent injury.
Setting up your PX720 tape library with DLTSage Tape Security consists of the
following steps:
•
Creating a Secure User
•
Creating a Secure Key
Creating a Secure User
C
:
If the secure key information is lost, any tape cartridges that were
AUTION
secured with the lost key will be unavailable for reading or writing.
The Secure User is the only user that has the ability to create, modify, and delete a
Secure Key for the Library. The Secure User also has the ability to enable and
, PN 6444601 located on the
0
0
PX720 Documentation
0