Inserting Lto Tape Cartridges; Figure 31 Rotating The Load Port Drum - Quantum P4000 User Manual

Figure 31 Rotating
the Load Port Drum
Inserting LTO Tape
Cartridges
2
Warning: Take care to keep fingers out of load port openings
when opening or closing the load port door or when
rotating the load port drum.
5 Manually close the load port door by pushing the load port assembly
so that it is flush with the front surface of the library. You will hear a
"click" when it locks into position.
If Auto Load is enabled, the library automatically moves the
cartridges to available bins.
The two load port magazines used when LTO tape drives are present in
the library are stationary and built into the load port. They accommodate
up to 8 LTO or DLT tape cartridges. The magazines employ no loading
mechanism (unlike the DLT removable magazines) .
To insert an LTO cartridge:
1 Simply place the LTO tape cartridge into the bins with the barcodes
facing out and the write-protect switch on the left (see
Quantum P4000 and P7000 Libraries User's Guide
Chapter 2 Basic Library Operations
Inserting Tape Cartridges into the Load Port
Load port
finger grip
Load
port
drum
figure 32).
57