Configuring, Installing, and Operating the Tape Drive
2.3.1 Selecting SCSI ID
Select the appropriate SCSI ID for the tabletop version of the tape system by
incrementing or decrementing the number displayed on the SCSI ID selection switch on
the tabletop tape system's rear panel (Figure 2-8). Press either the small switch above
the indicator to increment the number, or the small switch below the indicator to
decrement the number.
Note that the default SCSI ID of the system is SCSI ID 3.
SCSI Connectors (2)
SCSI ID Switch
Fan
Power Switch
Power Connector
Figure 2–8 DLT 8000 Tabletop Tape System Rear Panel
Quantum DLT 8000 Tape System
2-17