Quantum DLT 8000 Product Manual page 31

Revision History
Manual Number - Revision Date of Release Summary of Changes
Level
81-60118-03 November 9, 1999 1 st Release as Preliminary version of Rev
03.
Chapter 1: Dropped BHC from features
list on page 1-1. Restated compressed
transfer rate as "up to 12 MB/second,"
added definition for uncorrected READ
error. Modified references to variable
speed recording (now called Dual
Speed). Added new tape speed specs,
made corrections to vibration, shock,
and drop specification parameters (G for
g).
Chapter 2: Deleted recommendation
that all devices on SCSI bus have TERM
PWR enabled. Added note that BHC is
provided only for trained service
provider. Added information about pre-
installation testing.
Chapter 5: Added notes that BHC is
provided only for trained service
provider. Added the following
commands: PERSISTENT RESERVATION
IN, PERSISTENT RESERVATION OUT,
RELEASE UNIT (10), REPORT DENSITY
SUPPORT, REPORT LUNS, RESERVE UNIT
(10). Modified existing sections for
RELEASE UNIT and RELEASE UNIT to
specify that they are 6-byte commands.
Modified references to variable speed
recording options. TAMRIEDEFAULT
added to EEPROM Vendor Unique
Parameters
(Continued)
xxix
Quantum DLT 8000 Tape System