Table 2–15 Troubleshooting Chart - Quantum DLT 8000 Product Manual

Quantum dlt 8000: user guide
Hide thumbs Also See for DLT 8000:
Table of Contents

Advertisement

If...
Indicators along right-hand
side of front panel are blinking
and the Operate Handle Light is
illuminated steadily
If, after attempting the recommended actions listed in Table 2-14, the problem still exists
or returns, a hardware failure may be the cause. Contact a service representative.
Refer to Appendix E for complete visual inspection instructions for DLTtape cartridges.
The web site http://www.dlttape.com includes much valuable information about
DLTtape systems.
Configuring, Installing, and Operating the Tape Drive
Table 2–15 Troubleshooting Chart (continued)
Then...
The tape leader may be
dropped.
Quantum DLT 8000 Tape System
You Should...
Open the handle and look
inside the tape system. If the
tape leader is missing contact
your service representative.
Also, check the tape cartridges
for damage.
2-47

Advertisement

Table of Contents
loading

Table of Contents