Quantum DLT 8000 Product Manual page 403

SCSI Bus Differences
The table below illustrates the SCSI bus differences between a DLT 7000 system, a DLT
8000 system, and a DLT 8000 system with DLT 7000 emulation enabled.
SCSI opcodes that exist for a DLT 7000 drive will have an identical response on a DLT
8000 drive with emulation enabled. Note that SCSI opcodes that are not compatible
with a "real" DLT 7000 drive are supported by a DLT 8000 drive in DLT 7000 emulation
mode.
REPORT DENSITY
Command
REPORT LUNS Command
PERSISTENT RESERVE IN
Command
PERSISTENT RESERVE OUT
Command
INQUIRY Command
CmdDTbit
INQUIRY Data
Product Identification
Product Family
INQUIRY Vital Product
Data Page 83H
IEEE Identifier
DLT 7000 Drive
Not supported
Not supported
Not supported
Not supported
Not supported
"DLT 7000"
(Personality
dependent)
7 (35.0/70.0 GB)
Not supported
Quantum DLT 8000 Tape System
Appendix G: DLT 7000 Emulation Feature
DLT 8000 Drive with DLT 7000
DLT 8000 Drive
Supported Supported
(only reports supported formats)
Supported Supported
Supported Supported
Supported Supported
Supported Supported
"DLT 8000" "DLT 7000"
(Personality (Personality dependent)
dependent)
8 (40.0/80.0 GB) 9 (35.0/70.0 GB)
Supported Supported
Emulation Enabled
(Continued)
G-5