Table 1 18 Conducted Susceptibility; Table 1 19 Esd Failure Level Limits - Quantum DLT 8000 Product Manual

The transient voltage is the actual peak voltage above the normal ac voltage from
the power source.
Fast Transient (Bursts) for Power and Data Cables
2 kV
High Energy Transient Voltage for Power Cables *
1.2 kV
2.5 kV
Low-level Conducted Interference
3 V (rms) 80% modulated
kHz
Fast Transient (Bursts) for Power and Data Cables
2 kV
Failure Type
Hard Office
Hardware Office

Table 1 18 Conducted Susceptibility

S/W recoverable errors
No hardware failures
No errors
S/W recoverable errors
No hardware failures
1 No errors
S/W recoverable errors
No hardware failures
S/W Recoverable errors
No hardware failures

Table 1 19 ESD Failure Level Limits

Equipment Failure Level
1 to 12 kV
Up to 15 kV
Quantum DLT 8000 Tape System
General Description and Specifications
NOTE
Allowable Errors
No Operator Intervention (soft recoverable
allowed)
No component damage – operator
intervention allowed (soft/hard errors
allowed)
1-17