Quantum DLT 8000 Product Manual page 402

Appendix G: DLT 7000 Emulation Feature
Verifying Product Family via the SCSI Bus
You can verify a DLTtape system's product family via the SCSI Bus. The following table
describes the information returned by the SCSI command INQUIRY. The contents of the
Product Family bits (byte 4, bits 4 – 7) of the INQUIRY command's Subsystem
Components Revision Page (C1h). A DLT 8000 running with DLT 7000 emulation
enabled will return a Product Family code of 09h.
Product
DLT 7000
DLT 8000
DLT 8000 with DLT 7000
Emulation Enabled
Note that the Product ID of a DLT 8000 system running with DLT 7000 emulation
enabled is reported as a DLT 7000. The Product Family code, however, is reported as 9,
indicating that emulation is enabled.
G-4
Product ID*
"DLT 7000"
"DLT 8000"
"DLT 7000"
*The product ID is dependent on the Firmware Personality.
Quantum DLT 8000 Tape System
Product Family
7
8
9