SCSI Commands
REPORT LUNS Command (0Ah) (continued)
Bit
7
Byte
(MSB)
0 - 3
4 - 7
(MSB)
8 - 15
n-7 –
n
Figure 5–88 LUN Reporting Parameter List — Data Format
The LUN List Length field contains the length in bytes of the LUN list that can be
transferred. The LUN list length equals the number of logical unit numbers reported
multiplied by eight. If the allocation length in the CDB is too small to allow transfer of
information about all of the logical units configured, the LUN list length value is not
adjusted to reflect the truncation.
5-186
6
5
LUN List Length (n – 7)
LUN (first LUN)
LUN (last LUN, if more than one)
Quantum DLT 8000 Tape System
4
3
Reserved
2
1
0
(LSB)
(LSB)