Quantum DLT 8000 Product Manual page 167

INQUIRY Command (12h) (continued)
Table 5–9 Vendor Unique Inquiry Data Page — Field Descriptions
Field Name
Product Family
Released Firmware
... Version #
Vendor Unique Subtype
Firmware Personality
Firmware Subpersonality
Loader Present
Library Present
Module Revision
Description
This field indicates the data density of each of the DLT tape drives as
follows:
Product Family Bit
0
3
5
6
7
8
This flag differentiates between released and test versions of
firmware. When set to 1, indicates released code (Vxxx); 0 indicates
field test code (Txxx). Released code has no minor firmware version
number (byte 38 = 0). Field test and engineering versions of code
have non-zero minor firmware version numbers for tracking
purposes.
These field display the various version numbers in binary, not ASCII
Identification of product.
Numeric indicator of firmware personality. Note that when set to 4,
this indicates OEM family.
Set to 1, indicating standard SCSI device firmware.
Set to 0 indicates no loader present. Non-zero indicates loader is
present.
Set to 0 indicates no library present. Non-zero indicates library is
present.
A four byte ASCII string representing the revision level of the tape
drive's module (the controller PCBA attached to the tape drive).
Quantum DLT 8000 Tape System
Drive Density
Not Specified
10.0 / 20.0 GB
20.0 / 40.0 GB
15.0 / 30.0 GB
35.0 / 70.0 GB
40.0 / 80.0 GB
SCSI Commands
5-23