Quantum DLT 8000 Product Manual page 164

Quantum dlt 8000: user guide
Hide thumbs Also See for DLT 8000:
Table of Contents

Advertisement

SCSI Commands
INQUIRY Command (12h) (continued)
Table 5–8 contains field descriptions for the data returned by the drive.
Table 5–8 Standard Inquiry Data Page — Field Descriptions
Field Name
Peripheral Qualifier
Peripheral Device Type
RMB
Device Type Modifier
ISO Version
ECMA Version
ANSI Version
AENC
TrmlOp
Response Data Format
Additional Length
Mchnger
RelAdr
WBus 32
WBus 16
Sync
Linked
CmdQue
SftRe
Vendor Identification
Product Identification
5-20
Value
Description
0
Non-zero if initiator selects an invalid logical unit (see below)
1
1 indicates that this is a sequential access device (see below).
Note that the Peripheral Device Type entry for a medium
changer is 8.
1
Removable Medium Bit. Set to 1.
1
Set to 1 to specify a sequential access device.
0
International Standardization Organization Version level. Set
to 0.
0
European Computer Manufacturers Organization Version
level. Set to 0.
2
ANSI SCSI Level 2 (SCSI-2) is supported.
0
Asynchronous Event Notification is not supported.
0
Terminate I/O Process. The tape drive does not support the
TERMINATE I/O PROCESS message.
2
This Standard Inquiry Data is in SCSI-2 format.
33h
Tape drive uses this field to indicate the number of additional
bytes of INQUIRY Response Data available.
-
Set to 1 if a Media Changer (Loader) is present and EEPROM
parameter EnbIngMedChgr is set to 1. This SCSI-3 bit
indicates that the Read Element Status and Move Medium
commands can be issued to the drive (LUN0). By default, this
bit is set to 0 on the DLT 8000 drive.
0
Relative Addressing is not supported.
0
Set to 0 since the drive does not support 32-bit transfer.
1
The WBus bit is 1 since the drive supports 16-bit data
transfer.
1
The drive supports Synchronous Data Transfers.
1
Linked Commands are supported.
0
The drive does not support Tagged Command Queuing.
0
The drive implements the hard reset option in response to
assertion of the SCSI Bus reset line.
The value in this field is QUANTUM (there is one space after
the word Quantum)
The value in this field is DLT8000 (there is no space between
"DLT" and "8000" and one space after "DLT8000")
Quantum DLT 8000 Tape System

Advertisement

Table of Contents
loading

Table of Contents