Table A–2 Internal Status Bit Flags - Quantum DLT 8000 Product Manual

Decimal
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Bit 7 Bit 6
(Rsv'd)
Bit No. Description
0 If set to 1, Cleaning Light is Illuminated, otherwise Light is off.
2 & 1 Tape Directory Status Bits:
3 - 6 Reserved
7 If set to 1, the Internal Status Byte (Byte 18) is in Bit Flags format; otherwise
Byte 18 contains a status code.
Appendix A: Definition of Vendor Unique Sense Data Information
Table A–1 Internal Status Codes (continued)
Hexadecimal Description
29 Invalid Destination Slot
2A Source Slot Empty
2B Destination Slot Full
2C Medium Changer Motion Error
2D Medium Changer/Drive Interface Error
2E Medium Changer/Slot Interface Error
2F Medium Changer Mechanical Error
30 Medium Changer Hardware Error
31 Medium Changer Controller Error
32 Unrecognized Medium Changer Subcommand
33 Medium Changer Fatal Error
34 Medium Changer is in Manual Mode
35 68020 Detected Communication Error with Servo Area
36 68020 Detected Drive Command Timeout
37 Calibration Failure
38 Bad Tape Format
Table A–2 Internal Status Bit Flags
Bit 5 Bit 4
(Rsv'd) (Rsv'd)
Bit 2 Bit 1
0 0
0 1
1 0
1 1
Quantum DLT 8000 Tape System
Bit 3 Bit 2
(Rsv'd)
Good Status
Unknown Status
Partial Directory (will be rebuilt when tape is
undergoing READ/WRITE)
No Directory (will be rebuilt when tape is
undergoing READ/WRITE)
Bit 1 Bit 0
A-3