Quantum DLT 8000 Product Manual page 261

MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)
Table 5–53 READ / WRITE Error Recovery Page — Field Descriptions
Field Name
PS
Additional Page Length
TB
EER
PER
DTE
DCR
READ Retry Count
WRITE Retry Count
Description
Parameters Savable. Must be 0, the supported parameters cannot be
saved (savable pages are not supported).
This field indicates the number of bytes in the page. Note that this
value does not include bytes 0 and 1. The length is returned on
MODE SENSE and must subsequently be set to the same value when
performing MODE SELECT.
Transfer Block. The Transfer Block (when not fully recovered) function
is not supported.
Enable Early Recovery. This function is always enabled (must be = 1).
Parity Error. This bit enables reporting of CHECK CONDITION for
recovered READ / WRITE errors. Default is 0.
Disable Transfer on Error. Set to 0. This feature is not supported.
Disable ECC Correction Bit. Set to 0. This feature is not supported.
This field reports the maximum number of re-reads that are
attempted before declaring an unrecoverable error.
This field reports the maximum number or overwrite retries that are
attempted before declaring an unrecoverable error.
Quantum DLT 8000 Tape System
SCSI Commands
5-117