Quantum DLT 8000 Product Manual page 270

SCSI Commands
MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)
Table 5–57 Device Configuration Page — Field Descriptions (continued)
Field Name
Gap Size
EOD Defined
EEG
SEW
Buffer Size at Early
Warning
Select Data Compression
Algorithm
5-126
Description
Not supported. Set to 0.
End of Data. Set to 00h.
Enable EOD Generation Bit. Set to 1 to indicate that the drive
generates an EOD. The drive generates an EOD mark before any
change of direction following a WRITE-type operation.
Synchronize at Early Warning. Set to 1.
Not supported; must be 0.
If set to 1, data compression is enabled. If 0, data compression is
disabled.
Quantum DLT 8000 Tape System