Quantum DLT 8000 Product Manual page 96

Configuring, Installing, and Operating the Tape System
Table 2–13 Tape System Operating Modes / Indicator Activity (continued)
Front Panel
Indicator
All four right-hand
or all six left-hand
indicators
10.0 / 15.0
20.0
35.0
40.0
Compress
Density Override
2-42
Color of Indicator
---
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Quantum DLT 8000 Tape System
State Operating Mode
On POST is beginning
Blinking An error has occurred. See Section 2.9
for troubleshooting.
On Tape is recorded in 10.0 / 15.0 GB
format
Blinking Tape is recorded in another density,
10.0 / 15.0 GB has been selected for a
WRITE from BOT.
On Tape is recorded in 20.0 GB format
Blinking Tape is recorded in another density;
20.0 GB has been selected for a WRITE
from BOT.
On Tape is recorded in 35.0 GB format
Blinking Tape is recorded in another density;
35.0 GB has been selected for a WRITE
from BOT.
On Tape is recorded in 40.0 GB format
Blinking Tape is recorded in another density,
40.0 GB has been selected for a WRITE
from BOT.
On Compression mode enabled
(compression only valid for 10, 15,
20, or 35 GB densities only)
Off Compression mode disabled
On Operator selected a density from the
density Select Button on the front
panel and/or compression
Off Density to be selected by the host