Configuring, Installing, and Operating the Tape System
2.2.4.3 The Loader Connector
Located on the side of the integratible tape system (Figure 2-6), the loader connector
provides signals used when the tape system is part of a loader configuration.
2-14
Table 2–5 Power Connector Signal Names
Pin
1
2
3
4
Loader Connector Block
Figure 2–6 Loader Connector Block
Quantum DLT 8000 Tape System
Signal
+12 VDC
Ground (+12 V return)
Ground (+5 V return)
+5 VDC
Front Bezel