Quantum DLT 8000 Product Manual page 265

MODE SENSE (6) / (10) Command (1Ah / 5Ah) (continued)
Field Name
Page Length
RLEC
Queue Algorithm Modifier
Qerr
Dque
EECA
RAENP
UAAENP
EAENP
Ready AEN Holdoff Period
Table 5–55 Control Mode Page — Field Descriptions
Description
The value in this field indicates the number of bytes in the Control
Mode Page being transferred. The value for this byte is 06h.
Report Log Exception Condition. This bit indicates whether the tape
drive returns CHECK CONDITION status with sense key set to UNIT
ATTENTION (06h) when one of its WRITE and READ error counters
reaches a specified threshold, as follows:
0 Do not return UNIT ATTENTION when a threshold has been
met.
1 Return UNIT ATTENTION when a threshold is met.
Must be 0.
Queue Error. Must be 0.
Disable Queuing. Must be 0.
Enable Extended Contingent Allegiance. Not supported; must be 0.
Ready AEN Permission. Asynchronous event notification is not
supported; must be 0.
Unit Attention AEN Permission. Not supported; must be 0.
Enable AEN Permission. Asynchronous event notification is not
supported; must be 0.
Not supported. Must be 0.
Quantum DLT 8000 Tape System
SCSI Commands
5-121