Error Detection Summary In Log Sense Command Descriptor Block - Quantum DLT 8000 Product Manual

SCSI Commands
LOG SENSE Command (4Dh) (continued)

5.8.1 Error Detection Summary in LOG SENSE Command Descriptor Block

The following conditions constitute errors detected by the drive relating to the LOG SENSE
command descriptor block. The request sense data is set to ILLEGAL REQUEST, INVALID
FIELD IN CDB.
Error conditions occur when:
A page is not supported
The parameter pointer is larger than the highest numbered parameter on the page
The SP bit is set to 1
The Allocation Length is smaller than the data being returned by the target.
PPC bit set to 1
5-48 Quantum DLT 8000 Tape System