Quantum DLT 8000 Product Manual page 165

INQUIRY Command (12h) (continued)
Table 5–8 Standard Inquiry Data Page — Field Descriptions (continued)
Field Name
Product Revision Level
Vendor Specific
NOTE: Vendor Information, Product Identification, and Product Revision Level are returned as shown in
Figure 5–6.
Value Description
This field contains 4 bytes of ASCII data that provides the
drive's firmware revision levels. The first two bytes are the
version number of servo code. The second two bytes are the
version number of the SCSI/read/write code. When a firmware
update is performed on the DLT drive, this part of the
firmware revision level will change to reflect that update
(quotation marks will not appear).
See Section 5.4.2 for details.
Quantum DLT 8000 Tape System
SCSI Commands
5-21