Quantum DLT 8000 Product Manual page 146

SCSI Commands
Command
REPORT LUNS
REQUEST SENSE
RESERVE UNIT (6)
RESERVE UNIT (10)
REWIND
SEND DIAGNOSTIC
SPACE
TEST UNIT READY
VERIFY
WRITE
WRITE BUFFER
WRITE FILEMARKS
5-2
Table 5–1 Supported SCSI Commands (continued)
1. Relative Addressing is not supported by the tape drive. Therefore, in
all I/O commands, the RelAdr bit must be 0.
2. RESERVE UNIT and RELEASE UNIT by Logical Unit Number are
supported, as are third-party reservations. Extent reservations are
not supported.
3. The RECEIVE DIAGNOSTIC RESULTS and SEND DIAGNOSTIC DATA
commands implement vendor-unique pages to test the drive
during the manufacturing process. It is recommended that initiators
specify only the non-page format variants of these commands
(PF=0), except for page 0x40.
4. The DLT tape drive does not act as an initiator on the SCSI bus.
Therefore, the drive will not 1) generate unsolicited interrupts to the
host, 2) initiate its own SCSI commands, or 3) assert bus reset.
5. Linked commands are supported.
Quantum DLT 8000 Tape System
Operation Code
A0h
03h
16h
56h
01h
1Dh
11h
00h
13h
0Ah
3Bh
10h
NOTES
Subsection
5.22
5.23
5.24
5.25
5.26
5.27
5.28
5.29
5.30
5.31
5.32
5.33