Quantum DLT 8000 Product Manual page 203

LOG SENSE Command (4Dh) (continued)
Table 5–26 Tape Alert Flags, Severity Levels, and Meanings (continued)
Flag
22 Expired Critical
Cleaning
Media
31 Hardware B Critical
32 Interface Warning
34 Download Fail Warning
36 Drive Warning
Temperature
40 Loader Critical
Hardware A
42 Loader Warning
Hardware B
43 Loader Door Critical
* Severity levels are Informational, Warning, and Critical. Informational flags provide a status-type
message, Warning and Critical flags indicate that user intervention and/or service call may be
required.
Severity Level * Meaning
The cleaning cartridge that was used has expired. Wait for all
tape drive operations to complete, then use a valid cleaning
cartridge for cleaning.
The tape drive may have a hardware fault. Contact a service
representative.
The drive has identified a problem with the interface to/from
the host.
The attempted firmware download has failed.
Temperature within the tape drive is exceeding the allowable
specifications
The mechanism that loads media to the tape drive is
experiencing problems communicating with the tape drive.
The loader mechanism has experienced a hardware-related
fault.
The attempted operation has failed: the library/autoloader
door is not closed completely.
Quantum DLT 8000 Tape System
SCSI Commands
5-59