Quantum DLT 8000 Product Manual page 336

SCSI Commands
REQUEST SENSE Command (03h) (continued)
Table 5–87 REQUEST SENSE Data — Field Descriptions (continued)
Field Name
Tape Motion Hours
Power On Hours
Tape Remaining
5-192
Description
This field reports the number of tape motion (i.e., head wear) hours.
Format is given as a hexadecimal word (2 bytes).
This field reports the total number of hours that drive power has been
applied since its last power on cycle (not total power on hours over
the device's lifetime). Format is given as a hexadecimal longword (4
bytes).
This field reports the amount of tape remaining in 4 KB (4096 bytes)
blocks.
Quantum DLT 8000 Tape System