Table of Contents
Advertisement
Table 4
Event Codes and Actions
Event
Viewing
1
Code
Level
114
1
115
1
CAUTION: These event codes are not logged in the Event Log. Notification of these
events occurs from the ADIC Management Console. For more information on Heartbeat,
see the ADIC Management Console User's Guide.
5
200
NA
6
201
NA
6,7
202
NA
6,8
203
NA
Notes:
1
See
Table 6
on page 42.
2
See
Action Reference Table
3
Default Trap Threshold settings are explained "Events" in the ADIC Management Console User's Guide.
4
Check the Event Log to find out which interface (FCAL or SCSI) caused this event. Then use the appropriate
action number.
5
This trap signals a change in state. A string sent with the trap will indicate the nature of the previous state.
6
Events not logged in SNC Event Log.
7
Not Reported. View the Server Log.
8
Event reported only when ADIC Management Console 2.7 or above is running
Action Reference Table
Numerical references from the Action column in
the appropriate MAP in
Table 5
Action Reference Table
Action
Action
Number
0
No action necessary
1
Go to
SCSI Channel MAP
2
Go to
Fibre Channel MAP
3
Go to
MAP for the SNC
4
Go to
Temperature MAP
5
Go to
Power MAP
7
Go to
Ethernet MAP
SNC 4000 User's Guide
Default Trap
Description
Threshold
1
Temperature is running in Warning or Alarm
Range
1
Network is running at 10 Mb/sec
Heartbeat Event Descriptions
NA
The server could not verify the connection to
the SNC
NA
The client could not communicate with the
server
NA
The server could not communicate with the
client
NA
Heartbeat communication restored
on page 41.
Action Reference Table
on page 46
on page 52
on page 55
on page 55
on page 56
on page 56
Event Codes and Actions
on page 41.
2
Action
4
7
7,3
7,9
7,9
0
on page 37 are associated with
41
Advertisement
Table of Contents
