Table of Contents
Advertisement
6
Replacing Assemblies
To install the logic analyzer cable
84
3
Remove the logic analyzer cable.
a
Gently lift the logic analyzer cable end connector from
the circuit board connector (J1, J2, J3, or J4).
If the logic analyzer cable is faulty, replace the cable and
4
follow the next procedure to install the replacement logic
analyzer cable.
Connect the logic analyzer cable to the logic analyzer
1
circuit board.
Insert the logic analyzer cable to the logic analyzer
a
circuit board.
Align the logic analyzer cable end connector with the
b
circuit board cable connector (J1, J2, J3, or J4) and
H4
16962A Logic Analyzer Service Guide
Advertisement
Table of Contents
