Agilent Technologies 16962A Service Manual page 75

5
Troubleshooting
74
Set up the bus:
5
In the Overview window, select SetupBus/Signal... from
a
the module's drop- down menu.
Scroll if necessary to view the pods you are testing.
b
Verify that the pod threshold buttons say "Threshold:
c
Differential", as shown above. If they don't, make sure
the correct probes (E5379A) are attached to pods 1
and 2. The threshold is set to Differential automatically
when E5379A probes are attached.
16962A Logic Analyzer Service Guide