Agilent Technologies 16962A Service Manual page 33

3
Testing Logic Analyzer Performance
Table 6 81134A Pulse Generator Setup
Main
Mode: Pulse/Pattern
Freq: set in previous step.
Clock Internal
Table 7 8133A Pulse Generator Setup
Timebase Pulse Channel 2
Mode: Square  1
Mode: Int
Freq: was set in Delay: (not available in pulse mode)
previous step.
Width: (not available in square
mode)
Ampl: 0.25 V
Offs: 0.5 V
Output: Enable (LED off)
Comp: Normal (LED off)
Limit: Off (LED off)
Output: Enable (LED off)
32
Channel 2
Mode: Square  1
Timing
Delay Ctrl Input Off
Width: (not available in square mode) Width: (not available in square mode)
Pulse Perf: Normal
Deskew: 0 ps
Levels: Normal, Custom
Ampl: 0.25 V
Offset: 0.5 V
Term Voltage: 0 mV
Limit to current Levels: unselected
Output: Enable (LED on)
Output: Enable (LED on)
Channel 1
Mode: Square  1
Timing
Delay Ctrl Input Off
Pulse Perf: Normal
Deskew: 0 ps
Levels: Normal, Custom
Ampl: 0.25 V
Offset: 0.5 V
Term Voltage: 0 mV
Limit to current Levels: unselected
Output: Enable (LED on)
Output: Enable (LED on)
Trigger
Disable (LED on)
Trigger
Disable
Pulse Channel 1
Mode: Square
Delay: 0 ps
Width: (not available in square
mode)
Ampl: 0.25 V
Offs: 0.5 V
Output: Enable (LED off)
Comp: Normal (LED off)
Limit: Off (LED off)
Output: Enable (LED off)
16962A Logic Analyzer Service Guide