Table of Contents
Advertisement
16962A Logic Analyzer Service Guide
Channels 7 through 0 are already assigned by default.
d
Assign pod 2 channels 15 through 0 and pod 1
channels 15 through 8 by clicking and dragging from
the left- most channel box to the right- most channel
box. Your display should look like the lower picture
when you are done.
Select the State sampling mode and set the State Clock
6
options:
Select the Sampling tab of the Analyzer Setup window.
a
Select State - Synchronous Sampling.
b
For State Clock 1, select Pod 1 Clock and Both edges.
c
5
Troubleshooting
75
Advertisement
Table of Contents
