Table of Contents
Advertisement
5
Troubleshooting
76
Set the trigger position and acquisition memory depth:
7
Set the Trigger Position to 100% Poststore.
a
Set the Acquisition Depth to 8K.
b
Adjust sampling positions:
8
Select the Thresholds and Sample Positions button. The
a
Thresholds and Sample Positions dialog will appear.
In the "Buses/Signals" section of the Thresholds and
b
Sample Positions dialog, make sure the check box next
to "My Bus 1" is checked.
Select the Eye Scan with Sample Position Setup Only run
c
type.
Select the Run button in the Thresholds and Sample
d
Positions dialog.
16962A Logic Analyzer Service Guide
Advertisement
Table of Contents
