Table of Contents
Advertisement
16962A Logic Analyzer Service Guide
Close the Eye Finder and Analyzer Setup Windows
Select OK to close the Thresholds and Sample Positions
1
dialog.
Select OK to close the Analyzer Setup window.
2
Configure the markers
Data must be acquired before the markers can be configured.
Therefore, you need to run the analyzer to acquire data.
Switch to the Listing window by selecting the Listing tab
1
at the bottom of the main window.
Select the Run icon
2
Data will appear in the Listing Window upon completion
3
of the run.
If the data values are not "A"s and "5"s, you may need to
set the sampling positions in different eyes.
Testing Logic Analyzer Performance
.
3
51
Advertisement
Table of Contents
