To test the module
To clean the module
16962A Logic Analyzer Service Guide
The logic analyzer module does not require an operational
accuracy calibration or adjustment. After installing the module,
you can test and use the module.
• If you require a test to verify the specifications, see
"Testing Logic Analyzer Performance"
require a test to verify correct module operation using
software self- tests, see
page 24.
• If the module does not operate correctly, see
"Troubleshooting"
• With the mainframe turned off and unplugged, use a cloth
moistened with a mixture of mild detergent and water to
clean the rear panel.
• Do not attempt to clean the module circuit board.
on page 21. If you
"Perform the Self- Tests"
on page 63.
2
Preparing for Use
on
19