Table of Contents
Advertisement
To test the U4154A module
To clean the module
U4154A Logic Analyzer Service Guide
Preparing for Troubleshooting or Performance Testing
The U4154A logic analyzer module does not require an
operational accuracy calibration or adjustment. After
installing the module, you can test and use the module.
• If you require a test to verify logic analyzer's performance
with the specifications, see
Performance"
on page 21.
• If you require a test to verify correct module operation,
see
"To run the self tests"
• If the module does not operate correctly, see
"Troubleshooting"
• With the AXIe chassis turned off and unplugged, use a
cloth moistened with a mixture of mild detergent and
water to clean the front panel of the module.
• Do not attempt to clean the module's circuit board.
"Testing U4154A
on page 74.
on page 67.
2
19
Advertisement
Table of Contents
Troubleshooting
