GE LOGIQ P9 Service Manual page 424

GERAFT
D 5604324, R
IRECTION EVISION
Section 8-16
Replacement of Key Caps (by special native language keys)
8-16-1 Manpower
1 person, 30 minutes.
8-16-2 Tools
• Regular Standard Phillips Screwdriver
• Screwdriver (Diameter : 3mm)
8-16-3 Preparations
1) Power Off/Shutdown the system.
Before you replace the boards, please make sure you wear the Ground strap, which prevents
CAUTION
ESD problems just in case.
!! CAUTION:
8-16-4 Removal Procedure
1) Remove '1' Key, 'Left Shift' Key, 'F5' Key, '6' Key, '7' Key, 'H' Key, 'J' Key, 'N' Key, 'Back space'
Key, 'Right Shift' Key and 'Pg Up' Key by using fingertips. Refer to below Figure 8-75.
Figure 8-101 Remove key : '1', 'Left Shift', 'F5', '6', '7', 'H', 'J', 'N', 'Back space', 'Right Shift', 'Pg Up'
2) Remove the 6 screws using the plus(+) screwdriver. Refer to below Figure 8-76
8-98 Section 8-16 - Replacement of Key Caps (by special native language keys)
11 DRAFT (J
Figure 8-102 Loosen the 6 screws
24, 2019)
ANUARY
LOGIQ P9/P7
S M
ERVICE ANUAL