GE LOGIQ P9 Service Manual page 400

GERAFT
D 5604324, R
IRECTION EVISION
2) Unscrew 5 screws, then remove cable clamp.
NOTE: There is cable position marker at red circle.
3) Disconnect three Monitor cables. Refer to the figure below.
8-74 Section 8-11 - Replacement of Monitor and LCD Arm Plastic Covers
11 DRAFT (J
Figure 8-61 Unscrew cable clamp screws
Figure 8-62 Disconnecting Monitor cables
24, 2019)
ANUARY
Caution - This Clamp was only
applied by opposite direction
LOGIQ P9/P7
S M
ERVICE ANUAL