GE LOGIQ P9 Service Manual page 478

Hide thumbs Also See for LOGIQ P9:

Table of Contents

Installation Procedure

Parts to be installed in reverse order of removal. But, refer to below procedure for cable ties.

2 holes for fixing cable tie

Functional Check

Test 1: Print an image by pressing the button P1 on the operator panel. (P1 key should be configured

correctly. Refer to section 3-8-4 Adding Printer to the system)

Verify1: - Verify that image can be printed.

Verify2: - Verify that printed image has no distortion as compared the image on screen.

Figure 8-179 Tie cables with the tie through the holes

Section 8-29 - Replacement of Peripheral Cable Assy

Align the head of cable tie as shown

Show Quick Links

Table of Contents