Prepare The Printer And Connect The Bluetooth Printer Adapter; Hp Officejet 100; Bluetooth Pairing - GE LOGIQ P9 Service Manual

Hide thumbs Also See for LOGIQ P9:

Table of Contents

Prepare the Printer and connect the Bluetooth Printer Adapter

1) Connect the power cord to a wall outlet socket.

2) Turn on the printer.

3) Install ink tanks in the correct order.

4) Load paper in the auto sheet feeder.

5) Turn on Bluetooth radio.

Figure 3-23 Connection of Bluetooth Printer Adapter (HP Officejet 100)

1) Press [CTRL + ESC] to open windows start menu.

2) Select "Devices and Printers."

3) Press "Add a printer" button on the top menu.

4) Select "Add a network, wireless or Bluetooth printer."

5) Searching for available printers.

6) Select a printer.

7) Press "Next" button to install device driver, and then device driver software installed successfully.

8) Press "Next" button after confirming the printer name.

9) Check "Do not share this printer" option, and press "Next" button.

10) Press "Printer a test page" button to check if the printer is working properly.

11) Press "Finish" button.

12) The printer is listed in the "Device and Faxes" category.

13) Bluetooth pairing is completed.

Figure 3-24 Selecting a Printer

Section 3-8 - Printer Installation

Show Quick Links

Table of Contents