GE LOGIQ P9 Service Manual page 111

GEDRAFT
D 5604324, R
IRECTION EVISION
Table 3-8
Preset Parameter
Hospital
Department
Preset Region (restart needed)
Language (restart needed)
Units
Regional Options
Table 3-9
Preset Parameter
Time Format
Date Format
Default Century
Date/Time
11 DRAFT (J
Figure 3-32 System/General Preset Menu (R3.x.x)
Location
Type the institution's name.
Type the institution's department name.
Select region (None, Americas, Asia, Europe or Japan).
Select the appropriate language from the drop-down list.
Note: If you select Japanese (JPN), only the warning and status messages are displayed
in Japanese. You can not type in Japanese.
Select metric or US units of measurement.
Select to set up the keyboard.
Date and Time
Select the time format: 12 Hr. AM/PM or 24 Hr.
Select the date format: dd/mm/yyyy, mm/dd/yyyy, or yyyy/mm/dd.
Select the default century for the system to use.
Select to display the Date/Time Properties window, to specify the system date, time, time
zone, and to auto adjust for daylight savings time.
Chapter 3 - Setup Instructions
24, 2019)
ANUARY
Description
Description
LOGIQ P9/P7
S M
ERVICE ANUAL
3-43