GE LOGIQ P9 Service Manual page 273

GEDRAFT
D 5604324, R
IRECTION EVISION
System Shutdown
With remote access, System Shutdown provides a way to shut down or restart the LOGIQ P9/P7.
Disruptive mode must be On to shut down or restart the LOGIQ P9/P7. If Disruptive mode is Off, a
warning message displays.
The information on System Shutdown is available to Class M licenses.
To access System Shutdown, select Utility (second page) > Service > Utilities > System
Shutdown.
Figure 5-60 System Shutdown
This table shows all the elements available on System Shutdown with descriptions.
Table 5-38
Select Operation
Shutdown System
Restart System
Shutdown Application
Disruptive Mode
Retain Disruptive Mode
Submit Request
11 DRAFT (J
System Shutdown
Element
When Disruptive mode is On, shuts down the LOGIQ P9/P7 when Submit Request
is pressed.
When Disruptive mode is On, restarts the LOGIQ P9/P7 when Submit Request is
pressed.
When Disruptive mode is On, shuts down the application software when Submit
Request is pressed.
Determines whether Disruptive mode is retained after an operation has been
performed. Generally used by the remote engineer to regain access to disruptive
functions after a reboot without having to request Disruptive mode be enabled again.
Performs the operation selected under Select Operation.
Chapter 5 - Components and Functions (Theory)
24, 2019)
ANUARY
DESCRIPTION
LOGIQ P9/P7
S M
ERVICE ANUAL
5-89