GE LOGIQ P9 Service Manual page 444

GERAFT
D 5604324, R
IRECTION EVISION
Section 8-18
Replacement of Front fan
8-18-1 Manpower
1 Person, 10 minutes.
8-18-2 Tools
Standard Phillips Screwdriver.
8-18-3 Removal Procedure
1) Remove the Front Cover from system. (refer to section 8-6)
2) Remove 4 screws and disconnect fan connector.
3) Unlock cable clamp (square), then pull out connector and cable. Refer to following figures.
Figure 8-138 Fan screw points and disconnecting fan connector
8-18-4 Installation Procedure
Parts to be installed in reverse order of removal.
8-18-5 Functional Check
Visual examination.
1) Verify that Fan is rotating when system is turned ON.
8-118
11 DRAFT (J
Section 8-18 - Replacement of Front fan
24, 2019)
ANUARY
LOGIQ P9/P7
S M
ERVICE ANUAL