High/Low Beam - HOLDEN WH II 2002 Series Owner's Handbook Manual

Chapter 1
1-20
DASH
Fog lights (if fiHed)
Push the switch to turn the fog lights off or
on when the light switch is turned to parkers
or headlights. The light in the instrument
panel glows when the fog lights are working.
Fog lights are designed to provide a different
illumination of the road to the usual headlight
beam. Depending on the density of the fog,
different combination of lights will improve
vision. Fm-instance, in very heavy fog,
vision may be improved by turning the
headlights off, and just having the parkers
and fog lights on.
Driving speed should be reduced in fog.
It is recommended that you check your
State's laws regarding use of fog lights
when driving.
Hazard warning flasher
Press the switch to turn the hazard warning
flasher on and off. The hazard warning
flasher works regardless of the ignition
position.
When turned on, all turn signals flash
continuously.
Use the hazard warning flasher to warn
other drivers any time your car becomes a
traffic hazard, day or night.
Use of the hazard warning fiashers wr-Jiie
the car is moving is illegal in some States or
Countries.

High/low beam

High/low beam is controlled by the lever on
the right side of the steering wheel column.
With the headlights on, push the lever away
from you, until you feel a click, then release.
The headlights will change from low to high
beam. When the high beams are in use, a
blue symbol on the instrument panel is
displayed.
It is also possible to flash the high beams for
signalling purposes (even if the headlights
and/or ignition are switched off) by pulling
the lever towards you; the lights remain in
high-beam as long as the lever is held.
LIGHTS cont.