HOLDEN WH II 2002 Series Owner's Handbook Manual page 59

Chapter 2
2-12
LOCKS
From inside the car, pull the lever shown
towards you.
This allows the bonnet to release but is
prevented from opening by the safety catch.
To open completely, reach under the centre
of the bonnet and move safety catch
upwards. Hold in this position and raise
the bonnet.
After you have partially lifted the bonnet,
gas struts automatically take over, to lift
and hold the bonnet in the fully open
position. For closing, simply pull the bonnet
down and push firmly back into
BONNET LOCK
place.