HOLDEN WH II 2002 Series Owner's Handbook Manual page 117

Chapter 6
6-22
EMERGENCIES
Glovebox watts)
(5
Console bin (5
Boot (10 watts)
Rear reading
(5
Gently prise away the lens housing with a
fine bladed screwdriver.
Pull tab holding bulb (opposite end to wiring)
backwards and pull bulb out. To install new
bulb, first pull tab backwards. When new
bulb is in place feed wiring back into cavity
and push lens housing back into place.
Door watts)
(5
Gently prise away the lens housing with a
fine bladed screwdriver.
Pull tab holding bulb (opposite end to wiring)
backwards and pull bulb out. To install new
bulb, first pull tab backwards. When new
bulb is in place feed wiring back into cavity
and push lens housing back into place.
Instrument panel lights, vanity mirror lights
The replacement of these bulbs should be carried out by a Holden Dealer.
BULB REPLACEMENT cont.
watts)
watts)